Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 <2025>	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 <2025>
<== Date ==>		<== Thread ==>

Subject:	EPICS Support for NI-9223
From:	Abdalla Ahmad via Tech-talk <tech-talk at aps.anl.gov>
To:	"tech-talk at aps.anl.gov" <Tech-talk at aps.anl.gov>
Date:	Tue, 13 May 2025 07:58:25 +0000

I noticed on the NI section of EPICS manufacturers page https://epics.anl.gov/modules/manufacturer.php#National%20Instruments there is an EPICS driver for the NI-DAQmx interface which, according to NI website, works with the NI-9223 but the SVN URL ( http://epics.svn.sourceforge.net/viewvc/epics/applications/trunk/DAQmxBase/ ) is not working. Is there another URL to clone the driver? Will this driver work with the NI-9223? Are there other alternatives?

Best Regards,

Abdalla Al-Dalleh

Control Engineer

SESAME

P.O. Box 7, Allan 19252, Jordan
Tel: +96253511348 , ext. 265

Fax: +96253511423

Navigate by Date:: Prev: Re: How to know which CA client(IP address) modified a PV Ralph Lange via Tech-talk; Next: Re: EPICS Support for NI-9223 Ralph Lange via Tech-talk; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 <2025>
Navigate by Thread:: Prev: Re: Is there an easy way to implement continuing EPICS logging while the console line is open? Maren Purves via Tech-talk; Next: Re: EPICS Support for NI-9223 Ralph Lange via Tech-talk; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 <2025>

ANJ, 13 May 2025