Subject: |
CAMAC drivers |
From: |
"Eric Bjorklund, NPSM" <[email protected]> |
Date: |
Thu, 25 Aug 1994 14:39:56 -0600 (MDT) |
At LANL we are currently working on an extension of the CEBAF serial highway
driver (adding support for LAMs and multiple branches per IOC). This driver is
an implementation of the ESONE standard CAMAC library and is designed in two
sections. The ESONE interface is in one module and the hardware interface is
in a separate module. The idea is that your device support routines can use
the ESONE interface independantly of which hardware driver you load.
We are currently using the Hytec 2992 serial driver (as is CEBAF and Duke).
The design should allow you to support parallel drivers as well (like the 3992)
by writing a different hardware support module.
Further information can be obtained from:
[email protected]
- Navigate by Date:
- Prev:
CAMAC driver Steve Lewis
- Next:
Re: CAMAC driver watson
- Index:
<1994>
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: CAMAC driver watson
- Next:
getResources Marty Kraimer
- Index:
<1994>
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|