Subject: |
Trouble With Hytec VSD2992 Boards |
From: |
[email protected] |
Date: |
Thu, 27 Apr 1995 13:01:39 -0600 (MDT) |
I have heard stories of a site (CEBAF I believe) which was having problems with
the Hytec 2992 serial CAMAC driver board (e.g. 50% infant mortality rates) but
then discovered something (strapping, board setup, software... ???) which cured
the problem.
We too are experiencing problems with the Hytec 2992's (command timeouts, not
taking demand interrupts, longitudinal parity errors, etc.) on an alarming
number of our newer boards.
Is the story true? Is there a silver bullet?
- Eric Bjorklund
AOT-6, LANL
[email protected]
- Navigate by Date:
- Prev:
pvGet i/o timeout Chris Timossi
- Next:
rouble With Hytec VSD2992 Boards Carl Dickey
- Index:
1994
<1995>
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
pvGet i/o timeout Chris Timossi
- Next:
rouble With Hytec VSD2992 Boards Carl Dickey
- Index:
1994
<1995>
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|