Subject: |
CA @ the SSTF in St. Louis MO |
From: |
"Michael J. Feldhake" <[email protected]> |
Date: |
Fri, 30 Apr 99 10:09:39 EDT |
Gentlemen,
I am happy to inform you that there is another functional CA Client
running at Boeing's Subsonic Testing facility in St. Louis. Unfortunately,
the functional part is short lived - after about 10-15 minutes, the CA
Client Diagnostics receives messages from the Server that it is unable to
'Allocate Additional Memory' for cell.....(See Attached screen dump bitmap
for the complete message). The DAQ Crate must be re-booted before the
Channel Access port will respond again - all other activity appears to
remain active in the crate from other accessible nodes (i.e. UNIX Clients).
Can you provide us some assistance on this issue. I hope it's no more
than an incompatible driver issue with the Client using the later libraries
from EPICS and the DAQ using older ones ?
Thanks,
Mike
- Navigate by Date:
- Prev:
Re: Looking for EPICS edd 1.16 built for Solaris Everett Harvey
- Next:
C++ development on IRIX hosts Peregrine McGehee
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Allen Bradley Support Marty Kraimer
- Next:
RE: CA @ the SSTF in St. Louis MO Jeff Hill
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|