Subject: |
Re: gpib device |
From: |
Maren Purves <[email protected]> |
Date: |
Mon, 10 May 1999 07:46:10 -1000 |
Bill,
question, as I'm looking into GPIB-Ethernet or GPIB-RS232 'converters'
at the moment: does the HP-2050A support secondary addressing?
We need to be able to connect remotely as well as have secondary
addressing.
Thanks,
Maren
Bill Brown wrote:
> We're now using the HP-2050A Ethernet-GPIB bridge, using the software
> written by Ben Franksen. It's cheaper than a 1014, and it gives us a
> lot
> fewer problems. It uses the same device support modules for GPIB
> devices
> as the 1014; the driver and device support are layerd in a manner very
> similar
> to Johns' 1014 code. The "pain of transition" really is minimal.
> Another nice
> feature is that since it talks to the ioc via the network, the unit can
> be in remote
> location, which has come in handy for us a few times.
- Navigate by Date:
- Prev:
EPICS Channel Access Michael J. Feldhake
- Next:
RE: MV167 serial port Allan Honey
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: gpib device Bill Brown
- Next:
Re: gpib device Noboru Yamamoto
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|