All,
Last week during testing I found a bug in the channel
access client library which, while it should occur under
rare circumstances, is significant because it could result
in the failure of client side programs. If the problem
occurs in client programs running in the IOC experimental
evidence indicates that under heavy network communication
load network communication may stall or permanently fail.
I introduced the bug into R3.12 in August of 1995.
Symptoms on a workstation:
o client programs stall or hang when the workstation is
experiencing heavy network communication load
Symptoms on an IOC:
o dbCaLink or sequencer task in IOC is temporarily
or permanently using all available CPU at its priority
level.
o network communication to the IOC stalls or possibly
permanently fails under heavy network communication load
A patch for R3.13 will be available soon (I have committed
a fix to the R3.13.1 branch at APS). My apologies for any
inconvenience that this has caused.
Jeff
______________________________________________________
Jeffrey O. Hill Internet [email protected]
LANL MS H820 Voice 505 665 1831
Los Alamos NM 87545 USA FAX 505 665 5107
- Navigate by Date:
- Prev:
FW: NI VXIpc SBC and VxWorks Jeff Hill
- Next:
EPICS CA server and also GDD issues Jeff Hill
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
FW: NI VXIpc SBC and VxWorks Jeff Hill
- Next:
Re: bug in EPICS R3.13 and R3.12 Kenneth Kang
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|