Carl Lionberger wrote:
>
> We've developed a record that uses the block transfer calls in drvAb.c to
> communicate with a PLC-5 over remote I/O from a 6008 scanner. It's similar to
> the abDcmRecord but talks to a PLC-5 port configured as a remote I/O adapter
> rather than to a DCM card.
Note that the recent versions of abDcmRecord suport this. Note in the on-line
doc
DCMT
DCM type. This specifies if the DCM is a real DCM or a PLC adapter port.
Marty
- References:
- EPICS drivers for PLCs? Tony Wilson
- Re: EPICS drivers for PLCs? Carl Lionberger
- Navigate by Date:
- Prev:
Re: EPICS drivers for PLCs? Carl Lionberger
- Next:
XY566 Nick Rees
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: EPICS drivers for PLCs? Carl Lionberger
- Next:
Re: EPICS drivers for PLCs? Bill Brown
- Index:
1994
1995
1996
1997
1998
<1999>
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|