Experimental Physics and
Industrial Control System

Hi-

     I had a 167 with a stream of ASCII coming into serial port 2 on the
712.  The .st program was accessing from /tyCo/1, and everything worked
fine.  Recently, the person who was lending me the card asked for it back,
and returned the 162 that he had been borrowing.  Port 2 is now being used
to communicate with the card, and I don't know how to get the 162 to
access the data stream.  Does anybody have any suggestions?

						-Dennis

Replies:

Re: Switching from a 167 to a 162 Andrew Johnson

Navigate by Date:

Prev: Re: eddCvrt1.16To2.2 Bill Brown

Next: Re: native type of gdd object Vladimir Sirotenko

Index: 1994  1995  1996  1997  1998  1999  <2000>  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: eddCvrt1.16To2.2 Deb Kerstiens

Next: Re: Switching from a 167 to a 162 Andrew Johnson

Index: 1994  1995  1996  1997  1998  1999  <2000>  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024