Re: Switching from a 167 to a 162

["Garrett D. Rinehart" <rinehart@aps.anl.gov>]

> To: tech-talk@aps.anl.gov
> Subject: Switching from a 167 to a 162
> MIME-Version: 1.0
> 
> Hi-
> 
>      I had a 167 with a stream of ASCII coming into serial port 2 on the
> 712.  The .st program was accessing from /tyCo/1, and everything worked
> fine.  Recently, the person who was lending me the card asked for it back,
> and returned the 162 that he had been borrowing.  Port 2 is now being used
> to communicate with the card, and I don't know how to get the 162 to
> access the data stream.  Does anybody have any suggestions?
> 
> 						-Dennis
> 

I've done this and the only diff is remembering to use the ports on the front 
of the 162 instead of the 712 for ports 1 and 2.


Garrett Rinehart
Intense Pulsed Neutron Source
Argonne National Laboratory
9700 S. Cass Ave
Argonne, IL  60439
(630)252-6561