Just got back from a show and tell from WindRiver on network controls
systems. OPC is one item discussed by a company called EMation. It looks
like they have some OPC drivers that will work under vxWorks. There would
still be work to make it EPICS compatible but it's a start.\
Also, Allen Bradley was discussing EtherNet/IP protocol for talking to PLCs
over the net. EtherNet/IP is an open standard but they also mentioned a
driver for vxWorks.
John
> >-----Original Message-----
> >From: Coles Sibley [mailto:[email protected]]
> >Sent: Monday, June 19, 2000 7:42 AM
> >To: [email protected]
> >Subject: OPC interface?
> >
> >
> >Has anyone interfaced an OPC system with EPICS?
> >
> >Coles
> >
- Navigate by Date:
- Prev:
Re: OPC interface? Kay Kasemir
- Next:
Any GUI components based on the jca library out there. Hammonds, John
- Index:
1994
1995
1996
1997
1998
1999
<2000>
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: OPC interface? Kay Kasemir
- Next:
MEDM / DM2K comments in source file Steve Hunt
- Index:
1994
1995
1996
1997
1998
1999
<2000>
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|