Experimental Physics and
Industrial Control System

"Leonard J. Reder" wrote:
> 
> I looked into Galil VME controller boards but it only will
> control 4 motors.  Nominally we need a solution that can
> control 8 or more motors per VME board.  And the VME board
> should be supported via EPICS device support.
> 

The motor record has device support for Oregon Micro Systems
VME58-8S, which can provide up to eight axes of DC servo control.
The motor record's home page is;

http://www.aps.anl.gov/upd/people/sluiter/epics/modules/mechanism/motor/index.html

References:

Newport 850f motor control Leonard J. Reder

Navigate by Date:

Prev: osiTimerQueue pure virtual function John A. Priller

Next: RE: osiTimerQueue pure virtual function Jeff Hill

Index: 1994  1995  1996  1997  1998  1999  <2000>  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: EPICS support for Galil motor controllers Graham Waters

Next: RE: Newport 850f motor control Joe Ballek

Index: 1994  1995  1996  1997  1998  1999  <2000>  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024