Hello,
I am an EPICS user, and I have to change the base address of my NI1014
module in a crowded VME crate. It is actually set to 0x5000. How do I
change this setting in software, which files do I have to edit (other
than base/include/module_types.h) ?
Do I have to recompile the all EPICS or can I do something simpler ?
Many other users using the same state machine (and same EPICS core) work
with NI1014, but not having overpopulation problems in their crates they
do not have (want) to change their base address. Do I have a better
chance other than having my own complete, private version of EPICS ?
My EPICS version is 3.12.2 and I am using the driver drvGpib.c
in its 1991 version by John Winans.
Thank you very much for any insight you can give.
Gaspare Lo Curto
### Gaspare Lo Curto office 234 | Telephone: + 49 89 32354226 ###
### Max Planck Institut fur Physik | Fax: + 49 89 3226704 ###
### Foehringer Ring 6 | ###
### D-80805 Munich GERMANY | ###
- Navigate by Date:
- Prev:
EPICS base 3.14.0alpha1 Marty Kraimer
- Next:
devSupport for CAEN V767 Peter Mueller
- Index:
1994
1995
1996
1997
1998
1999
<2000>
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: EPICS base 3.14.0alpha1 Marty Kraimer
- Next:
Re: changing base address to NI1014-GPIB Ned Arnold
- Index:
1994
1995
1996
1997
1998
1999
<2000>
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|