Carl Lionberger wrote:
>
> Anybody have EPICS drivers for talking to TDS 3000 oscilloscopes through
> their TDS 3EM ethernet adapter? Or even a driver for VXI-11 (TCP/IP
> Instrument Protocol), which is the protocol it uses?
>
Will the Agilent E2050A GPIB/LAN driver work for this? The driver talks
VXI-11 and now runs on host or target IOCs with R3.14.
Some small changes are certainly necessary since the E2050A driver
telnets to the device to issue a reset command on startup, but I would
expect the VXI-11 part of the driver to work.
--
Eric Norum [email protected]
Department of Electrical Engineering Phone: (306) 966-5394
University of Saskatchewan FAX: (306) 966-5407
Saskatoon, Canada.
- References:
- Tektronix TDS 3000, TDS 3EM, VXI-over-TCP/IP Carl Lionberger
- Navigate by Date:
- Prev:
Public availability of EPICS Bakul Banerjee
- Next:
VxWorks lamentations Chestnut, Ronald P.
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Tektronix TDS 3000, TDS 3EM, VXI-over-TCP/IP Carl Lionberger
- Next:
Public availability of EPICS Bakul Banerjee
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|