Hello all,
We have a variety of Siemens S7-300 and S7-400 PLCs that we need to integrate in to EPICS. I'm wondering if anyone has any information on where to begin. Ideally, we would like to talk S7 to them but failing that could probably settle for Profibus-DP. From the IOC side of things, we have a Siemens PCI card CP-5613 for communicating with the PLCs.
As you might have guessed, I'm new to researching EPICS-type info. and somewhat green with Profibus in general.
Any pointers, comments or suggestions greatly appreciated.
Regards,
Robby Tanner B.Sc. (EE), B.Sc. (Cmpt. Sci)
Controls Engineer
Canadian Light Source
University of Saskatchewan
101 Perimeter Road
Saskatoon, Saskatchewan
Canada
S7N 0X4
Ph: (306) 657-3582
Fax: (306) 657-3535
http://www.lightsource.ca
- Replies:
- Re: Siemens/Profibus Drivers Matthias Clausen
- Navigate by Date:
- Prev:
Labview <-> EPICS Mark M. Ito
- Next:
Re: subRecord fix Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
<2002>
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Lab view <-> EPICS David H. Thompson
- Next:
Re: Siemens/Profibus Drivers Matthias Clausen
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
<2002>
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|