At 08:35 5/22/2003, BOTHNER Udo (562.73) wrote:
>Hi,
>
>At a guess K-U Kasemir knows the answer...
>
>When using the LABVIEW PVxxxx.vi tools in SERVER-mode to handle
>a boolean from MEDM (with a Choice Button), MEDM shows a
>10-buttons widget (because DBR_CTRL_ENUM = 10) instead of the
>normally "ON/OFF" pair (when DBR_CTRL_ENUM = 2)
>
>I can't locate where this "10" default value comes from.
It's an error in the ActiveX CA Server:
Trying to be smart about allocating memory,
I made the enum string array jump in increments of 10.
- Navigate by Date:
- Prev:
Re: R3.14.2 is available Marty Kraimer
- Next:
RE: R3.14.2 is available -- SEQ v2.0.4 @ SLAC Laznovsky, Michael
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
<2003>
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
ENUM with LABVIEW CAserver BOTHNER Udo (562.73)
- Next:
R3.14.2 is available Marty Kraimer
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
<2003>
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|