I have Ethernet-MODBUS support which is based on code obtained from the
Canadian Light Source. The CLS code is written to run on RTEMS and
supports Modicon PLCs.
I modified it to be OS independent, to work with 3.14.2 and to add
support for Siemens power meters.
John.
Vladis Korobov wrote:
>
> Hi all,
>
> I have to connect from EPICS to WAGO System PLC using MODBUS protocol (via Ethernet).
> Has anybody any software for such kind of communication?
>
> Any suggestions and advise will be appreciated,
> -----------
> Vladislav Korobov
> MKS-2 Group, DESY
> Notkestr. 85
> 22607 Hamburg, Germany
> tel. +49 40 8998 3947
> e-mail:[email protected] or
> [email protected]
- Replies:
- Re: EPICS to WAGO PLC using Ethernet MODBUS Eric Williams
- References:
- EPICS to WAGO PLC using Ethernet MODBUS Vladis Korobov
- Navigate by Date:
- Prev:
Re: The EPICS record field base attribute Marty Kraimer
- Next:
stale data monitor Vladimir Sirotenko
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
<2003>
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
EPICS to WAGO PLC using Ethernet MODBUS Vladis Korobov
- Next:
Re: EPICS to WAGO PLC using Ethernet MODBUS Eric Williams
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
<2003>
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|