Hi,
Could you, please, explain me how can I do synchronization in
two next examples.
1. Detector has slow module, for example high voltage nodule, and ADC
digitizer module.
So I have two records (as minimum). SCAN field of ADC record is "I/O
Intr".
Situation is next. Operator changes voltage setting record of High
Voltage module.
ADC should wait until potential will be set. How can I do it?
2. Detector has amplifier with gain and ADC digitizer module.
So I have two records (as minimum). SCAN field of ADC record is "I/O
Intr".
Situation is next. Operator can change gain during ADC is doing
measurement (for example,
ADC should take 200 samples, gain was changed on 100 samples). How can I
"freeze" gain?
Also I can find Record Reference Manual for Epics 3.13.7. Is there more
new manual?
Thanks, Andrei.
- Replies:
- Re: syncronisation bettween records kuner
- Navigate by Date:
- Prev:
CA performance Liyu, Andrei
- Next:
Among the things for which I wish... Pete R Jemian
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
<2003>
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
CA performance Liyu, Andrei
- Next:
Re: syncronisation bettween records kuner
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
<2003>
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|