Hi,
Give this a try:
Before you start medm (or any CA client) set the EPICS_CA_ADDR_LIST like
so:
=========================================================================
export EPICS_CA_ADDR_LIST="<linux-ip-number>:5064 <linux-ip-
number>:5066"
=========================================================================
So, bascially the EPICS CA address list can contain a list of space
delimited entries in <IP>:portnumber format.
Thanks,
Ernest L. Williams Jr.
SNS Control Systems Group
ORNL
On Wed, 2005-07-27 at 19:29 -0700, Emmanuel Mayssat wrote:
> Hello all,
>
> I have 2 epics processes (ioc) running on the same linux computer at 2
> different ports.
> Now, I would like to use 1 top medm display to access the process
> variables of both processes.
>
> Accessing the PV of one of the iocs is easy.
>
> export EPICS_CA_SERVER_PORT=5064
> export EPICS_CA_REPEATER_PORT=5065
> medm -x <myMedmDisplay1>.adl
>
> and
>
> export EPICS_CA_SERVER_PORT=5066
> export EPICS_CA_REPEATER_PORT=5067
> medm -x <myMedmDisplay2>.adl
>
> Now if I create a <topDisplay>.adl that consists only of a [related
> display] medm widget that is referencing <myMedmdisplay1>.adl and
> <myMedmDisplay2>.adl, then it does not work.
> I can only access half of the process variables. That is the PVs of
> either the ioc running on port 5064 or 5066.
>
> How can I contact both ports at once?
>
> --
> E
>
- References:
- medm and epics ports Emmanuel Mayssat
- Navigate by Date:
- Prev:
Making an ioc on linux go much faster Emmanuel Mayssat
- Next:
problem when running epics ioc in win32 system 刘姝
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
medm and epics ports Emmanuel Mayssat
- Next:
Making an ioc on linux go much faster Emmanuel Mayssat
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|