All my memories of GPIB horrors are returning.
I've put together ASYN/devGPIB support for an (obsolete) HP8116A
signal generator. I'm trying to communicate with the generator
through an Agilent E5810A GPIB/LAN adapter. As far as I can tell I'm
sending the correct strings but the generator never acts upon the
commands. Every once in a very long while it will return a status
message in response to a command, but most of the time it just sits
there. Once in a while it sets the SRQ line and then leaves it set
forever.
Does anyone out there have experience with HP8116A GPIB communication?
--
Eric Norum <[email protected]>
Advanced Photon Source
Argonne National Laboratory
(630) 252-4793
- Replies:
- Re: HP8116A signal generator David Maden
- Navigate by Date:
- Prev:
Re: Support for larger messages in IOC Error Logging facility Andrew Johnson
- Next:
Enum labels via JCA? Christopher Larrieu
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: calcout without update Tim Mooney
- Next:
Re: HP8116A signal generator David Maden
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
<2006>
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|