Experimental Physics and
Industrial Control System

Hi,

I just wanted to let you know that I put up a howto page on the issue (using 
linux-gpib with EPICS) in the EPICS Wiki:

http://www.aps.anl.gov/epics/wiki/index.php/How_to_use_GPIB_ports_with_linux-gpib_and_StreamDevice

It features all the details of the setup of linux-gpib, as well as 
instructions on how to test/verify connectivity using ibtest.

Let me know if those instructions work for you.
-Stefan

-- 
Stefan Heim, PhD Student X-ray microscopy
BESSY mbH, Albert-Einstein-Straße 15, D-12489 Berlin, Germany
voice: +49 30 6392 3177 fax: + 49 30 6392 4757 e-mail: [email protected]
BESSY mbH - Mitglied der Leibniz Gemeinschaft
Vorsitzender des Aufsichtsrates: Prof. Dr. Dr. h.c. mult. Joachim Treusch
Geschäftsführer: Prof. Dr. Dr. h.c. Wolfgang Eberhardt, Prof. Dr. Eberhard 
Jaeschke 
Sitz Berlin, AG Charlottenburg, HRB 14635

References:

error in communicating to the GPIB device with NI-PCI board zhangdemin99

Re: error in communicating to the GPIB device with NI-PCI board Stefan Heim

Navigate by Date:

Prev: Re: CA connection management problem Andrew Johnson

Next: CA connection management - vxWorks David Maden

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  <2008>  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: error in communicating to the GPIB device with NI-PCI board Stefan Heim

Next: asynRecord immutable fields Eric Williams

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  <2008>  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024