Hello,
I am using medm and have noticed something strange.
I have a display with 32 waveforms.
I can open related displays associated with each of those waveforms
(like autoscaled waveform, moving average, etc.)
I noticed that when I open or close a related display ( actually any
display attached to same medm process), all the waveforms freeze.
The IOC is working correctly.
As if none of the monitors were working.
When I open another related display, then the displays update again.
Have you ever experienced this?
Any idea where this could be coming from?
I suspect the PV traffic could be an issue.
Let's assume that I have 40 waveforms with 1200 samples each and a scan
(and updating) rate of .1 Hz.
Is medm overloaded?
Regards,
--
E
- Replies:
- RE: medm weirdness Mark Rivers
- RE: medm weirdness Mark Rivers
- Navigate by Date:
- Prev:
RE: Portable Channel Access Server on vxWorks Jeff Hill
- Next:
RE: medm weirdness Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Portable Channel Access Server on vxWorks Jeff Hill
- Next:
RE: medm weirdness Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
<2008>
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|