Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	RTEMS-GeSys_2.1.beta and cexp-1.5 for uC5282 Coldfire Module
From:	"K.M Ha" <[email protected]>
To:	<[email protected]>
Date:	Tue, 29 Apr 2008 18:07:19 +0900

Hi All,

i tried to make RTEMS-GeSys_2.1.beta for m68k-rtems.

However i get below messages;

[root@localhost RTEMS-GeSys_2.1.beta]# make
Makefile:134: *** GeSys has not been ported/tested on this BSP (uC5282) yet.

Anybody have a experiance of make GeSys object for uC5282 ?

Second:

I trid to cexp-1.5 for m68k-rtems, but i don't know how to make target cpu uC5282.

Anybody can advice to me how to make cexp object with EPICS base for uC5282 target ?

If have cexp with EPICS base getting started manul then very helpful and easy of access .

Thanks,

Kiman Ha

Replies:: Re: RTEMS-GeSys_2.1.beta and cexp-1.5 for uC5282 Coldfire Module Till Straumann

Navigate by Date:: Prev: Edm-1-11-1f compilation problem [SEC=UNCLASSIFIED] WANG, Jian; Next: FW: Beginners C++ questions Mark Rivers; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Edm-1-11-1f compilation problem [SEC=UNCLASSIFIED] WANG, Jian; Next: Re: RTEMS-GeSys_2.1.beta and cexp-1.5 for uC5282 Coldfire Module Till Straumann; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 <2008> 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024

ANJ, 02 Sep 2010