Re: USE of CA lib: problem using ca_array_put_callback with strings

[Andrew Johnson <anj@aps.anl.gov>]

Hi Christophe,

On Thursday 20 November 2008 10:49:18 haquin wrote:
>
> We are in the following config:
> - vxWorks 6.5
> - MPC 7457 processor
> - MVME5500 -0161
> - BSP version 2.0/4
>
> The epics target is vxWorks-mvme5500
>
> I didn't modified the source code of the R3.14.9,
> I still have to check it has not been modified by someone else,
> I keep you informed about this point.

The vxWorks-mvme5500 target architecture is not one that ships with EPICS 
Base.  Can you try building and using the vxWorks-ppc604_long architecture 
instead (which is the official target for that processor) and see if the 
problem still occurs?  If not, you'll have to post the configuration files 
you're using for that target (base/configure/os/*vxWorks-mvme5500*) for me to 
help any further.

- Andrew
-- 
Talk is cheap. Show me the code. -- Linus Torvalds