Hi Christof,
921600 baud may be more than the serial interface of your IOC supports. Have a
look at the hardware specifications for your IOC.
Dirk
Christof Motzko wrote:
Hi,
I am trying to communicate with the I-7565 USB/CAN Converter with
StreamDevice, which can be used as local serial device. A baud rate of
921600 is necessary for the Converter, but I can't configure asyn to
this baud rate. Can anybody tell me how I can change the baud rate to
921600?
Thanks
Christof
---------------
Christof Motzko
Institut f. Experimentalphysik I
Ruhr-Universitaet-Bochum
Universitaetsstr. 150
D-44780 Bochum
--
Dr. Dirk Zimoch
Paul Scherrer Institut, WBGB/006
5232 Villigen PSI, Switzerland
Phone +41 56 310 5182
- References:
- How to change baudrate to 921600 in asyn? Christof Motzko
- Navigate by Date:
- Prev:
cainfo does display host info Carl Schumann
- Next:
Re: cainfo does display host info Ernest L. Williams Jr.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: How to change baudrate to 921600 in asyn? Mark Rivers
- Next:
Re: How to change baudrate to 921600 in asyn? Dirk Zimoch
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
<2009>
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|