Hi All,
I am integrating a turn-by-turn BPM system into EPICS and would like to
store the raw BPM pickup data in a waveform record. Due to the nature
of the system, each run can result in a different number of samples for
each BPM pickup, so the array size is unknown in advance and could
potentially be different every run.
Is it possible to resize the number of waveform record elements in my
device support, or do I have to size the waveform record in advance for
the maximum number of samples that could be expected. Most of the
examples of waveform device support I see read the nelm field and return
this fixed amount of data via the records bptr.
Thanks,
Graham
--
Scanned by iCritical.
- Replies:
- Re: Waveform Record Device Support Dirk Zimoch
- Re: Waveform Record Device Support emmanuel_mayssat
- Re: Waveform Record Device Support Till Straumann
- Navigate by Date:
- Prev:
EDM Related Display Question Szalata, Zenon M.
- Next:
Re: Waveform Record Device Support Dirk Zimoch
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
EDM Related Display Question Szalata, Zenon M.
- Next:
Re: Waveform Record Device Support Dirk Zimoch
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
<2010>
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|