EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <20102011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <20102011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject:
From: "Ahn, Si Won" <[email protected]>
To: <[email protected]>
Date: Wed, 8 Sep 2010 17:01:02 +0900
I am trying to compile SDDS on Linux (CENTOS 4.8  w/ Kernel 2.6.9-89.0.25)
with EPICS base R3.14.4.  I keep getting the following compile error.   Any
suggestions?
I was not find libXaw.a file our  linux system but I found libXaw.so our
system.

**to start error messages ***

make[1]: Entering directory
`/home/post/skumar/Elegant/epics/extensions/src/SDDS/SDDSaps/sddsplots'
make -C O.linux-x86_64 -f ../Makefile TOP=../../../../.. T_A=linux-x86_64
install
make[2]: Entering directory
`/home/post/skumar/Elegant/epics/extensions/src/SDDS/SDDSaps/sddsplots/O.lin
ux-x86_64'
make[2]: *** No rule to make target `/usr/lib64/libXaw.a', needed by
`sddsplot'.  Stop.
make[2]: Leaving directory
`/home/post/skumar/Elegant/epics/extensions/src/SDDS/SDDSaps/sddsplots/O.lin
ux-x86_64'
make[1]: *** [install.linux-x86_64] Error 2
make[1]: Leaving directory
`/home/post/skumar/Elegant/epics/extensions/src/SDDS/SDDSaps/sddsplots'
make: *** [SDDSaps/sddsplots.install] Error 2

** end ***

>From Ahn, Si Won,
computer system administrator
Physics Dept. POSTECH
San 31 Hyoja-Dong, Namku      Phone: (Korea) 054 279 2760
Pohang, Kyungbuk 790-784      Mobile Phone: 010 3131 2760
Republic of KOREA                E-mail: [email protected]









Replies:
Re: what are you talking/asking about? Benjamin Franksen
Re: Pete Jemian
Re: Robert Soliday

Navigate by Date:
Prev: RE: Examples of synApps scaler record using asyn port driver Angus Gratton
Next: Re: Examples of synApps scaler record using asyn port driver David Kline
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <20102011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: problem about use aSubRecord to handle waveform record wantm
Next: Re: what are you talking/asking about? Benjamin Franksen
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  <20102011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 09 Sep 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·