MCA (Matlab Channel Access) new version

[Korhonen Timo <Timo.Korhonen@psi.ch>]

Dear all,

the enhancements to mca (Matlab Channel Access) that I announced in the 
last EPICS meeting are now
available (except the GUI objects - those are not really part of the 
mca. They will follow later - if there
is interest..)
After consulting with Kay Kasemir we decided to put the code into 
SourceForge (sorry APS folks,
I know you have problems with it) epics-applications project:
https://sourceforge.net/projects/epics/

The code is in CVS:/extensions/mca

It has been in use here at PSI for a while (apart from one small change 
in egu handling) on our
Scientific Linux 5 machines and I am not aware of any open issues.

Please take a look at the code and see if it works on other platforms 
and with Octave.
Do not hesitate to point out problems - I am not very experienced in 
matlab interface API
and my C++ skills also need some brushing up...

The main changes are listed in the release note (for version 4.2)

cheers,
Timo

--
Timo Korhonen  PSI (Paul Scherrer Institut, http://www.psi.ch) 
              CH-5232 Villigen PSI 
              tel + 41- 56 3103262  fax + 41 - 56 310 5090 
e-mail:	       timo.korhonen@psi.ch