Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	ISA 5.1. CAD tool
From:	Jeřábek Jiří <[email protected]>
To:	"[email protected]" <[email protected]>
Date:	Thu, 18 Oct 2012 06:12:49 +0000

Folks,

Can anybody recommend a proven(!) CAD software supporting

the “ISA 5.1 INSTRUMENTATION SYMBOLS AND IDENTIFICATION ” standard ?

More generally, any advice, experience concerning using software design tools

for projecting and/or documenting a large distributed control system is highly appreciated.

I mean e.g. list of tools, their relevancy for partial tasks, ease of use , supplier, etc.

If somebody is familiar with an UML software used to capture and document control system requirements, algos, etc. ,

I would like to discuss the matter separately from the written above.

Thanks for any suggestion,

Jiri

Jiří Jeřábek

ELI Czech Republic

m: +420 702 004 857

Navigate by Date:: Prev: Re: gpu integration into epics Rodrigo Castro; Next: CSS widget patard; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: RE: burtrb failing on local LAN, but not through gateway Hill, Jeff; Next: CSS widget patard; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024

ANJ, 18 Nov 2013