Hi Mark,
On 2013-06-15 Mark Rivers wrote:
> It turns out that the acquire parameter, ADAcquire was being set to 0 in
> the constructor for the ADBase base class. But the busy record still has
> STAT=UDF, SEVR=INVALID. Further investigation shows that this is the case
> for all record types if the record has never processed.
It is possible to set STAT and SEVR to NO_ALARM (or 0) in your .db file if
you don't want a record to be in an alarm state and you can't set PINI=YES.
- Andrew
--
What would the effect on the NSA be if everybody put in their
signature lines stuff like "the bomb goes off tonight"?
- References:
- EPICS device disconnects and reconnects Mark Rivers
- Re: EPICS device disconnects and reconnects feng
- RE: EPICS device disconnects and reconnects Mark Rivers
- Navigate by Date:
- Prev:
转发: Epics ioc share from Phoenix Contact chenyuhui
- Next:
Re: 转发: Epics ioc share from Phoenix Contact Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: EPICS device disconnects and reconnects Mark Rivers
- Next:
Re: EPICS device disconnects and reconnects Bruce Hill
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|