Hi Kevin,
I have written EPICS drivers for an older (non-CONEX) Newport autocollimator, as well as for other CONEX devices (motors). The CONEX devices act as serial devices (though typically they are USB). I just read the autocollimator manual, and it would be very easy to implement SteamDevice support for the commands it supports. I would not recommend using their DLL, just send the commands directly.
Mark
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Kevin Peterson
Sent: Thursday, July 11, 2013 4:11 PM
To: EPICS tech-talk
Subject: Newport CONEX-LDS Electronic Autocollimator
Does EPICS support exist for the Newport CONEX-LDS Electronic
Autocollimator?
Kevin
--
Kevin M. Peterson
(630) 252-8644
[email protected]
- References:
- Newport CONEX-LDS Electronic Autocollimator Kevin Peterson
- Navigate by Date:
- Prev:
RE: Simple wireless light controlled through EPICS? Mark Rivers
- Next:
RE: Simple wireless light controlled through EPICS? Gomella, Andrew (NIH/NHLBI) [F]
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Newport CONEX-LDS Electronic Autocollimator Kevin Peterson
- Next:
Simple wireless light controlled through EPICS? Gomella, Andrew (NIH/NHLBI) [F]
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|