EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RE: areaDetector driver for Point Grey FlyCapture2 SDK?
From: <[email protected]>
To: <[email protected]>, <[email protected]>
Date: Thu, 19 Dec 2013 14:35:09 +0000
Hi Mark,

That does look like an interesting sensor. So interesting that I fired off an email to the AVT sales rep. He says "[Sony] will start mass producing the sensor in Q2/3 of 2014 and AVT will bring out a Mako version of it on GigE and USB3.0 shortly after that". I have tested the G125 version of the Mako with aravisGigE and it works fine, so if you don't find time to write an areaDetector driver for the flycapture SDK you could wait for that. Of course if you need 1920x1200 at 162fps it won't fit down a gigabit ethernet connection, so it will be interesting to see what they offer for the GigE version of the IMX174 Mako...

Thanks,
Tom Cobb

> -----Original Message-----
> From: [email protected] [mailto:tech-talk-
> [email protected]] On Behalf Of Mark Rivers
> Sent: 18 December 2013 13:16
> To: [email protected]
> Subject: areaDetector driver for Point Grey FlyCapture2 SDK?
> 
> Folks,
> 
> Has anyone written an areaDetector driver that uses the Point Grey
> FlyCapture2 SDK?  I am planning to purchase this very interesting new
> camera:
> 
> http://ww2.ptgrey.com/Sensors/IMX174/IMX174_IntroductionPage.aspx
> 
> 1920x1200 CMOS
> Global shutter
> 162 frames/s
> 7 e- read noise
> 76% quantum efficiency
> 32500 e- full-well capacity
> USB 3.0 interface
> $1,295
> 
> Since it is USB 3.0 I believe the areaDetector Aravis GigE driver can't
> be used, and I need a driver written using their FlyCapture2 SDK.
> 
> Thanks,
> Mark
> 


-- 
This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. 
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
 





References:
areaDetector driver for Point Grey FlyCapture2 SDK? Mark Rivers

Navigate by Date:
Prev: RE: Design strategies for CSS BOY screens Sinclair, John William
Next: Re: Design strategies for CSS BOY screens Pearson, Matthew R.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: areaDetector driver for Point Grey FlyCapture2 SDK? Mark Rivers
Next: Design strategies for CSS BOY screens tom.cobb
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 20 Apr 2015 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·