Dear Emmanuel,
we are talking about the regulation of the current on the magnets, many
times they have to be regulated in couple.
The operator has requested one knob per magnet, plus other two knobs to
adjust the scales. They want this because they adjust the current
looking other instruments (..old real analog instruments).
We are a small lab with limited man-power therefore I'm looking to a
COTS solution but integrated with EPICS.
>>>>"To me, the problem you describe is in large part due to wrong UI
design."
I'm in the process to design many UI, please feel free to point me out
the docs/books/urls to learn more on this topic.
Thank you very much.
-Mauro
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Mauro Giacchini
Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali di Legnaro
V.le dell'Universita', 2
35020 LEGNARO (PD) - ITALY
Tel./Fax. +39.049.8068558
EPICS _at_ LNL http://www.lnl.infn.it/~epics/
...the first EPICS installation to the project SPES realized from the
scratch in ITALY is in production since begin 2010!!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
On 2/17/2014 9:37 PM, Emmanuel Mayssat wrote:
"how do I want to interact with the 'system'?"
The answer you will find there is likely to be specific to your case
at hand.
Therefore for a more detailed answer, you probably will need to share
more of the details of what you are trying.
What do you want to set through those knobs? How many knobs do your
need? Where is the user? etc.
---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com
- Replies:
- RE: control knobs to a new control system Emmanuel Mayssat
- References:
- control knobs to a new control system Jack
- RE: control knobs to a new control system Emmanuel Mayssat
- Navigate by Date:
- Prev:
RE: Bayer vs RGB1 performance for Prosilica cameras Mark Rivers
- Next:
VS: control knobs to a new control system Koponen Jukka
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: control knobs to a new control system Emmanuel Mayssat
- Next:
RE: control knobs to a new control system Emmanuel Mayssat
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|