Experimental Physics and
Industrial Control System

Pete Jemian <[email protected]> · Tue, 24 Jun 2014 14:24:38 -0500

http://www-csr.bessy.de/control/SoftDist/sequencer/Installation.html

On 6/24/2014 2:23 PM, Vikram Bhagat wrote:

Hi Lange,
  Can you please indicate which version of sequencer is for 3.14.12.4?
The link http://www.slac.stanford.edu/grp/cd/soft/epics/sequencer is not
accessible.

It is also not available on http://www.aps.anl.gov/epics.

Thanks
Vikram

On Sunday, June 22, 2014 11:52 AM, Ralph Lange <[email protected]> wrote:

On 22/06/2014 09:01, Vikram Bhagat wrote:

I am trying with
seq-2.0.11.tar.gz

That is an old version of the sequencer. Its download page [1] very
clearly shows the version of base it works with, in this case 3.14.8
Maintainership of the sequencer module has moved. Please use a recent
version of the sequencer, available on its current home [2], which will
compile and work without problems with a recent version of base. The
EPICS web site [3] also points to the current home of the sequencer.

Cheers,
~Ralph

ps. Could someone at SLAC please put a prominent "outdated" note on the
old sequencer page, with a link pointing to its current home? Thank you!

[1] http://www.slac.stanford.edu/grp/cd/soft/epics/sequencer

[2] http://www-csr.bessy.de/control/SoftDist/sequencer
[3]
http://www.aps.anl.gov/epics/modules/soft.php

--
----------------------------------------------------------
Pete R. Jemian, Ph.D.                <[email protected]>
Beam line Controls and Data Acquisition, Group Leader
Advanced Photon Source,   Argonne National Laboratory
Argonne, IL  60439                   630 - 252 - 3189
-----------------------------------------------------------
   Education is the one thing for which people
      are willing to pay yet not receive.
-----------------------------------------------------------

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System