I am trying to use RTEMS Cexp with RTEMS 4.10.2 running EPICS 3.14.12.4. I would
prefer to use the latest Cexp version 2.2. I have built Cexp but am facing various
build issues with the version of GeSys I have found.
Firstly, where is the latest GeSys source?
http://www.slac.stanford.edu/~strauman/rtems/software.html
just has a snapshot dated 2011/09/27.
The build issues when building GeSys include:
1. Tries to build target "rtemsbsp-install" for Cexp (no such target).
2. No rule to make GeSys target `o-optimize/libbspExt.nm', needed by `libnms'.
My GeSys INSTALL file mentions Cexp version 1.6 as well as obsolete rtemsNfs, so
there may well be build incompatibilities with the different subsystem versions.
Has anyone built GeSys using recent versions of RTEMS and Cexp?
BTW I am running RTEMS on a MVME6100 board (RTEMS "beatnik" BSP).
Thanks,
Philip Taylor
===============================================================================
Philip Taylor email : [email protected]
Observatory Sciences Ltd. Web : http://www.observatorysciences.co.uk
Brighton Media Centre Phone : (UK)+(0)1223-655603
21-22 Old Steine Mobile : 07913-720806
BRIGHTON.
BN1 1EL
U.K.
===============================================================================
- Replies:
- Re: Building Cexp & GeSys with RTEMS 4.10.2 Till Straumann
- Navigate by Date:
- Prev:
RE: How to tag soft channels as undefined/disconnected Lionberger, Carl A.
- Next:
Re: New to EPICS - system design questions Michael Davidsaver
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: How to tag soft channels as undefined/disconnected Andrew C. Starritt
- Next:
Re: Building Cexp & GeSys with RTEMS 4.10.2 Till Straumann
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|