Hi all,
I have some applications created with EPICS 3.14. These applications have mainly waveform records(I needed to store lon strings), subroutine records, Sequencer for state handling(I had also "mis-used" it for some data processing work) and Asyn. I am trying to evaluate EPICS 4.4 (CPP). Till now I have understood that even with version 4.4, I will be using the same IOCs created with 3.14. So my question is what additional benefits will I get from migrating to 4.4? I need to perform some heavy data processing(the reason why I was misusing Sequencer). With 4.4 will I be able to directly include C++ codes into the application to do the data processing?
--- Thanks and Regards, Deeptarka Das Mailto: [email protected]
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
- Replies:
- Re: Need to migrate from 3.14 to 4.4 Ralph Lange
- Navigate by Date:
- Next:
Stream device error when processing unsolicited commands Andrew Gomella
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Next:
Re: Need to migrate from 3.14 to 4.4 Ralph Lange
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
|