Experimental Physics and
Industrial Control System

"Zelazny, Michael Stanley" <[email protected]> · Mon, 9 Feb 2015 13:54:34 +0000

YES! The command is called "system".  In order to see it from your IOC shell, you'll need to add system.dbd to the Makefile in your application's src directory.
________________________________________
From: [email protected] [[email protected]] on behalf of Deeptarka Das/TVM/TCS [[email protected]]
Sent: Monday, February 9, 2015 4:44 AM
To: [email protected]
Subject: How to make standalone applications run from within EPICS shell

Hello,

If I create a standalone C program by writing necessary lines in the Makefile in the src folder of my EPICS application, I can see an executable created in the bin/$EPICS_HOST_ARCH folder. I can run this program from outside the IOC, but is there a way that I can run this from within the IOC? The way SNL codes are run using the seq command, is there a way to execute C codes from within the EPICS shell?

--
Thanks and Regards,
Deeptarka Das
Mailto: [email protected]<mailto:[email protected]>

=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System