Experimental Physics and
Industrial Control System

Hi,

We are looking at a Bergoz Turbo-ICT & BCM-RF for a beam charge monitoring application.
Unfortunately, from my perspective, the device is configured using a USB interface and a Windows driver.
Has anyone in the community had success configuring this device from Linux?
Better yet, has anyone created an EPICS driver for Bergoz BCM?

Here is the vendor's web site:

http://www.bergoz.com/index.php?option=com_content&view=article&id=57&Itemid=467

At this time I don't find Bergoz in the EPICS hardware support database:

http://www.aps.anl.gov/epics/modules/manufacturer.php

Thanks,
 -Chris Ford
  SLAC

Navigate by Date:

Prev: CSS 4.33 / Mars 4.5.2 / BOY not found Alex Squitieri

Next: Re: CSS 4.33 / Mars 4.5.2 / BOY not found Kasemir, Kay

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: CSS 4.33 / Mars 4.5.2 / BOY not found Kasemir, Kay

Next: Question about ASYN setting Input & Output EOS Michael Westfall

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024