Re: s7plc more than one 240-byte PDU

["Zimoch Dirk (PSI)" <dirk.zimoch@psi.ch>]

I don't know either. Perhaps the PLC can't do it. The PLC guys will know.

Dirk

Am 20.10.2017 um 19:32 schrieb Paul Sichta <psichta@pppl.gov>:

OK, thanks I'll see what the PLC guys says about that.  That was my first thought, but then I didn't see how on the PLC side to direct the send-block mechanism to an ipaddr:port .

-ps

On Fri, Oct 20, 2017 at 1:24 PM, Zimoch Dirk (PSI) <dirk.zimoch@psi.ch> wrote:

Hello Paul,

If you cannot increase the block size (the driver has no limit on this but maybe the PLC) you can have two blocks on the PLC running on different ports. To the IOC this would look like two devices.

Dirk

Am 20.10.2017 um 19:18 schrieb Paul Sichta <psichta@pppl.gov>:

I have been using s7plc driver for years with one SND and one RCV block on the PLC.  Now, we need to send more data than can fit in the (max size) 240-byte block.  How can I send more data to EPICS?  

Regards,

-ps