Hello everyone,
I started to work with a Dectris strip Detector Mythen2 X 1K and I am
using the Mythen module from AreaDetector. This detector can reach
1000fps, however the IOC starts to drop frames with frequencies higher
than 100fps.
Has anyone experience this limitation with this type of detector?
To avoid network issues, I have a straight network connection between
the PC and detector.
I also noticed that the IOC only requests 1 frame at a time when it
could (according to the manual) requests multiples frames to avoid
communication overheads. Has anyone tried implementing this?
My versions:
- Ubuntu 16.04
- EPICS base 3.15.5
- ADCore 2-6
- ADMythen 2-0
________________________________
Helmholtz-Zentrum Berlin für Materialien und Energie GmbH
Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V.
Aufsichtsrat: Vorsitzender Dr. Karl Eugen Huthmacher, stv. Vorsitzende Dr. Jutta Koch-Unterseher
Geschäftsführung: Prof. Dr. Bernd Rech (kommissarisch), Thomas Frederking
Sitz Berlin, AG Charlottenburg, 89 HRB 5583
Postadresse:
Hahn-Meitner-Platz 1
D-14109 Berlin
http://www.helmholtz-berlin.de
- Replies:
- RE: Mythen M1K - Low fps Mark Engbretson
- RE: Mythen M1K - Low fps Mark Rivers
- Navigate by Date:
- Prev:
Re: PMAC asyn autoconnect issue Bruno Martins
- Next:
Re: PMAC asyn autoconnect issue Bruno Martins
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
<2018>
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Excel DDE to EPICS interface freddie.akeroyd
- Next:
RE: Mythen M1K - Low fps Mark Engbretson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
<2018>
2019
2020
2021
2022
2023
2024
|