I'm currently developing an areaDetector module for a sensor that delivers its
information as double values. The code is ready, but I'm somehow not able to
setup the ioc correctly to deliver the data in the NDStdArray. Looking with
caget at the ArrayData it shows all values as zero.
Here is what my dbLoadRecords line looks like:
dbLoadRecords("$(ADCORE)/db/NDStdArrays.template", "P=$
(PREFIX),R=image1:,PORT=Image1,ADDR=0,TIMEOUT=1,NDARRAY_PORT=$
(PORT),TYPE=Float64,FTVL=FLOAT,NELEMENTS=8000")
My question is, has anybody before tried to read floats? With another driver
that reads UInt32 values, I succeeded to setup the ioc.
Regards,
Jörn Dreyer
- Replies:
- Re: areaDetector question Hinko Kocevar
- RE: areaDetector question Mark Rivers
- Navigate by Date:
- Prev:
RE: PV gateway renders PVs as disconnected Abdalla Ahmad
- Next:
Re: areaDetector question Hinko Kocevar
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
<2018>
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
June EPICS Meeting Registration Open Andrew Johnson
- Next:
Re: areaDetector question Hinko Kocevar
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
<2018>
2019
2020
2021
2022
2023
2024
|