Experimental Physics and
Industrial Control System

Your entry is still in the list, but you never sent me a link for it so the only reference is to your old APS email address. Maybe someone in BCDA has a copy (which is probably in synapses so on github now).

Hello Pete,

 

I developed [asyn] support for the 2612A some time ago while in the Detector

Development group working with Dr. Steve Ross ~ 2010, then submitted it for

inclusion. At some point there was a link on the main EPICS / modules page

under Keithley, but I’ve been out of the touch with the EPICS community for some

time now [recently subscribed again]. Maybe Andrew Johnson may know where

it is/went? If not I may be able to find a copy, but would have to get back to you

on that.

 

/david

 

From: [email protected] <[email protected]>
Sent: Wednesday, May 9, 2018 7:51 AM
To: Kline, David <[email protected]>; '[email protected]' <[email protected]>
Subject: RE: Keithley 2634B Source Meter

 

Hi David,

It would certainly be a good starting point. Is it available for download somewhere?

Thanks

Pete

 

 

From: Kline, David [mailto:[email protected]]
Sent: 09 May 2018 12:56
To: Leicester, Pete (DLSLtd,RAL,TEC); '[email protected]'
Subject: RE: Keithley 2634B Source Meter

 

At some point support was developed for the 2612A. Would that

serve as a departure point ?

 

/david

 

From: [email protected] <[email protected]> On Behalf Of [email protected]
Sent: Wednesday, May 9, 2018 5:39 AM
To: '[email protected]' <[email protected]>
Subject: Keithley 2634B Source Meter

 

Has anyone developed EPICS support for a Keithley 2634B Source Meter?

 

https://uk.tek.com/keithley-source-measure-units/smu-2600b-series-sourcemeter

 

Pete

 

Mr P J Leicester

Senior Software Systems Engineer

Diamond Light Source Ltd.

 

 

 

 

 

-- 

This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
 

---

This message is intended only for the personal and confidential use of the recipients named above. If the reader of this email is not the intended recipient, you have received this email in error and any review, dissemination, distribution or copying is strictly prohibited. If you have received this email in error, please notify the sender immediately by return email and permanently delete the copy you received.

This message is provided for informational purposes and should not be construed as a solicitation or offer to buy or sell any securities or related financial instruments. Wolverine is not responsible for any recommendation, solicitation, offer or agreement or any information about any transaction, customer account or account activity that may be attached to or contained in this communication. Wolverine accepts no liability for any content contained in the email, or any errors or omissions arising as a result of e-mail transmission. Any opinions contained in this email constitute the sender's best judgment at this time and are subject to change without notice.

 

-- 

This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
 

---

This message is intended only for the personal and confidential use of the recipients named above. If the reader of this email is not the intended recipient, you have received this email in error and any review, dissemination, distribution or copying is strictly prohibited. If you have received this email in error, please notify the sender immediately by return email and permanently delete the copy you received.

This message is provided for informational purposes and should not be construed as a solicitation or offer to buy or sell any securities or related financial instruments. Wolverine is not responsible for any recommendation, solicitation, offer or agreement or any information about any transaction, customer account or account activity that may be attached to or contained in this communication. Wolverine accepts no liability for any content contained in the email, or any errors or omissions arising as a result of e-mail transmission. Any opinions contained in this email constitute the sender's best judgment at this time and are subject to change without notice.