Experimental Physics and
Industrial Control System

Mark Rivers <[email protected]> · Fri, 25 May 2018 10:57:57 +0000

Something is strange, the link I sent works for me and the link you sent (with the -2 at the end) does not work.

Mark

________________________________
From: [email protected] <[email protected]> on behalf of Jeong Han Lee <[email protected]>
Sent: Friday, May 25, 2018 3:53 AM
To: [email protected]
Subject: Re: benchtop testbeds for EPICS development and testing?

Hi Mark,

   Sorry again, I found the correct link.

https://www.ptgrey.com/blackfly-23-mp-color-gige-poe-sony-pregius-imx249-2

   Best,
   Han

On 05/25/2018 10:48 AM, Jeong Han Lee wrote:
> Hi Mark,
>
>    The link is broken. Do you have any other suggestion instead of this,
> because I would like to buy one?
>
>    Best,
>    Han
>
> On 05/11/2018 07:00 PM, Mark Rivers wrote:
>> Hi Gedare,
>>
>> If you want to test with real hardware you can use an inexpensive GigE
>> camera such as this one from Point Grey:
>>
>> https://www.ptgrey.com/blackfly-23-mp-color-gige-poe-sony-pregius-imx249
>>
>> It is 1920x1200 pixels, 41 frames/s, $495 USD.
>>
>> 1920*1200 pixels * 1 Byte/pixel * 41 frames/s ~ 94 MB/s, so this can
>> also put a significant load on a 1 Gbit Ethernet network.
>>
>> Mark
>>
>>
>>

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System