Experimental Physics and
Industrial Control System

Heinz Junkes <[email protected]> · Thu, 7 Jun 2018 04:35:20 +0200

There is RTEMS 5 support for the MVME2500 made by Sebastian Huber.
Unfortunately, I have not been able to test it properly with EPICS7.
I will try it after the Epics meeting and will report.

Heinz 

> On 6. Jun 2018, at 23:24, Matt Rippa <[email protected]> wrote:
> 
> Thanks for the fast reply. Of all the mvme boards you listed,
> the 3100 hits a nice price point and we're attempting to find
> suitable replacement stock (quantity 30+) for the 2700 which are no longer
> manufactured. 
> 
> Are the 6100 boards on beatnik bsp the only remaining option for RTEMS?
> They cost nearly twice as much and have shown thermal regulation issues.
> 
> -Matt
> 
> On Wed, Jun 6, 2018 at 11:10 AM, Michael Davidsaver <[email protected]> wrote:
> Hi Matt,
> 
> The MVME3100 is based on the MPC8540 processor.  This chip doesn't have an FPU.
> Other boards do (eg. mvme270x, mvme6100, or mvme2500) and RTEMS supports this.
> 
> I can certainly confirm that lack of an FPU really hurts performance, even
> something as (apparently) simple as integer to float.
> 
> Michael
> 
> 
> On 06/06/2018 02:03 PM, Matt Rippa wrote:
> > It appears we've compiled our mvme3100 bsp without FPU support.
> > We're on the mvme3100 running EPICS 3.14.12.7 and RTEMS 4.10.2.
> > 
> > We're attempting to commission our astrometric kernel control system
> > and we've run into trouble meeting some of our thread deadlines. What
> > we've found is a transform routine that takes our mvme2700 ~200 us,
> > takes the mvme3100 ~8 ms.  So not a surprise to see this with only "-msoft-float"?  
> > 
> > ...
> > 2018-05-31-tcs.log:May 31 11:41:15  E) PORT: tcs_vme, MSG: Welcome to rtems-4.10.2(PowerPC/Generic (*no FPU*)/mvme3100) 
> > 
> > Is FPU support possible with RTEMS 4.10.2? If so, what would we need to do?
> > It looks like there's a multilib on 4.11.2 https://docs.rtems.org/releases/rtems-docs-4.11.2/cpu-supplement/powerpc.html#multilibs(*Eg., see #13* )
> > 
> > Here's our bsp specs:
> > 
> > beatnik:
> > -specs bsp_specs -qrtems -fasm -c -mcpu=7400 -D__ppc_generic -DUNIX -O2 -g -g -Wall
> > (mvme2700) mvme-2307:
> > -specs bsp_specs -qrtems -fasm -c -mcpu=604 -mmultiple -mstring -mstrict-align -meabi -DUNIX -O2 -g -g -Wall
> > mvme-3100
> > -specs bsp_specs -qrtems -fasm -c -mcpu=powerpc *-msoft-float* -D__ppc_generic -DUNIX -O2 -g -g -Wall
> > 
> > Thank you!
> > -Matt
> > 
> 
> 
> 
> -- 
> 
> ----------------------------------------------------------------------
> Das FHI verarbeitet, speichert und loescht Daten im Rahmen seiner
> Geschaeftstaetigkeit gemaess der Datenschutz-Grundverordnung (DSGVO)
> [General Data Protection Regulation (GDPR)] der Europaeischen Union.
> 

----------------------------------------------------------------------
Das FHI verarbeitet, speichert und loescht Daten im Rahmen seiner
Geschaeftstaetigkeit gemaess der Datenschutz-Grundverordnung (DSGVO)
[General Data Protection Regulation (GDPR)] der Europaeischen Union.

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System