Hey Patrick,
I had a quick look at the data sheet. Unfortunately I could not find any
information on the data grams.
If the Ethernet communication is string based you can keep things simple
and just use asyn+stream.
That's what we are using for our devices from Pfeiffer (including the
pumps for small test setups).
HTH,
Florian
Am 16.12.2019 um 16:42 schrieb Patrick Oppermann via Tech-talk:
Hello, everybody,
we would like to read a mass spectrometer from Pfeiffer.
https://www.pfeiffer-vacuum.com/en/products/measurement-analysis/analysis-equipment/residual-gas-analysis/residual-gas-analysis-in-ultra-high-vacuum/prismapro-qmg-250-m1-1-100-u/32109/prismapro-qmg-250-m1-1-100-u
Has anyone ever written a device driver for it?
Thank you very much,
Patrick
--
Dr. Florian Feldbauer
Ruhr-Universität Bochum
Experimentalphysik I AG
Universitätsstr. 150
Fach-Nr. 125
D-44801 Bochum
Office: NB 2/134
Phone: (+49)234 / 32-23563
Fax: (+49)234 / 32-14170
https://paluma.ruhr-uni-bochum.de
- References:
- Pfeiffer mass spectrometer Patrick Oppermann via Tech-talk
- Navigate by Date:
- Prev:
Pfeiffer mass spectrometer Patrick Oppermann via Tech-talk
- Next:
Re: Periodic scan rate less than 20 msec Michael Davidsaver via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
<2019>
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Pfeiffer mass spectrometer Patrick Oppermann via Tech-talk
- Next:
computer for EPICS with EIGER 4M John Dobbins via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
<2019>
2020
2021
2022
2023
2024
|