We’re trying to connect to a gige camera with areadetector (using ADaravis). We would like to access the camera images via a pv that returns a jpeg of the image rather than an uncompressed byte stream.
We’ve got the camera connected, we’ve got an NDPluginCodec setup that takes the images and apparently is producing compressed jpeg images. We can enable acquisition and watch the MEDM screen show frames arriving and degree of compression, etc.
Our problem is: how do we access those images? There doesn’t seem to be any PV that returns the jpeg. Perhaps we’re supposed to pass the output of the codec to something else but we can’t seem to find anything that tells us how to do that.
Help would be appreciated.
Randall Cayford
ALS at Lawerence Berkeley Lab
- Replies:
- RE: Getting images from area detector plugins Mark Rivers via Tech-talk
- References:
- CAS-client thread issues in areaDetector IOC Wlodek, Jakub via Tech-talk
- RE: CAS-client thread issues in areaDetector IOC Mark Rivers via Tech-talk
- Re: CAS-client thread issues in areaDetector IOC Wlodek, Jakub via Tech-talk
- Re: CAS-client thread issues in areaDetector IOC Michael Davidsaver via Tech-talk
- Navigate by Date:
- Prev:
Re: CAS-client thread issues in areaDetector IOC Michael Davidsaver via Tech-talk
- Next:
RE: Getting images from area detector plugins Mark Rivers via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
<2020>
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: CAS-client thread issues in areaDetector IOC Michael Davidsaver via Tech-talk
- Next:
RE: Getting images from area detector plugins Mark Rivers via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
<2020>
2021
2022
2023
2024
|