RE: Lucid Vision Cameras

[Mark Rivers via Tech-talk <tech-talk at aps.anl.gov>]

Hi John,

 

It should work with ADAravis.  It won’t work with ADVimba or ADSpinnaker, because those only work with cameras from AVT and FLIR respectively.

 

Mark

 

 

From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of Engbretson, Mark S. via Tech-talk
Sent: Friday, July 31, 2020 2:34 PM
To: John Dobbins <john.dobbins at cornell.edu>; tech-talk at aps.anl.gov (tech-talk at aps.anl.gov) <tech-talk at aps.anl.gov>
Subject: RE: Lucid Vision Cameras

 

Chances are that it already is support by either the ADAravis or ADVimbra which both derive from ADGenicam. Mark Rivers did his normal excellent work on GenICam supported hardware.

 

From: Tech-talk <tech-talk-bounces at aps.anl.gov> On Behalf Of John Dobbins via Tech-talk
Sent: Friday, July 31, 2020 2:31 PM
To: EPICS Tech Talk <tech-talk at aps.anl.gov>
Subject: Lucid Vision Cameras

 

 

Someone here purchased some GigE cameras from Lucid Vision. Their Phoenix line.  They say GenICam on the web-site.  Am I correct in understanding they would require a new driver based on the areaDetector GenICam driver?

 

Should I tell them to buy a different camera? 

 

 

John Dobbins

 

Research Support Specialist

Cornell High Energy Synchrotron Source

Cornell University

 

www.chess.cornell.edu

 

Maybe it's all part of a great big ineffable plan. - Neil Gaiman, _Good Omens_