Experimental Physics and
Industrial Control System

Hi Michael,

I once wrote a driver for the PS90 to control some non OWIS motors in a slit 
system. I don't know whether the code still works for the PS90+ that you 
mention. If you are interested in the code as a starting point, I can send it 
to you.

Regards,

Jörn

Am Donnerstag, 7. Juli 2022, 11:50:46 CEST schrieb Sintschuk, Michael via 
Tech-talk:
> Hi all,
> 
> does anyone have EPICS-Support for position control units from Owis?
> https://www.owis.eu/en/products/Positionier-Steuerungen~338
> 
> Like the PS 10-32, PS 30, PS 35 or PS 90+ ?
> 
> Regards
> Michael
> 
> Michael Sintschuk
> Bundesanstalt für Materialforschung und -prüfung (BAM)
> 8.5 Mikro-ZfP
> 
> Unter den Eichen 87
> 12205 Berlin
> GERMANY
> 
> P: +49 30 8062-15063 (BESSY, Adlershof)
> P: +49 30 8104-4065 (BAM, Steglitz)
> michael.sintschuk at bam.de<mailto:michael.sintschuk at bam.de>
> michael.sintschuk at helmholtz-berlin.de<mailto:michael.sintschuk@helmholtz-ber
> lin.de>

References:

EPICS-Support for Owis motor stages Sintschuk, Michael via Tech-talk

Navigate by Date:

Prev: AW: EPICS Support for Deben CT5000 5kN in-situ loadcell tensile stage Sintschuk, Michael via Tech-talk

Next: Re: Set/get enum value of mbbo from within AD driver Mark Rivers via Tech-talk

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  <2022>  2023  2024 

Navigate by Thread:

Prev: EPICS-Support for Owis motor stages Sintschuk, Michael via Tech-talk

Next: AW: EPICS Support for Deben CT5000 5kN in-situ loadcell tensile stage Sintschuk, Michael via Tech-talk

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  <2022>  2023  2024