Greetings,
I have a SoM with an Arria 10 fpga. I run the IOC on the arm processor
and transfer I/O using /dev/mem.
We have a kernel driver so that we can use IRQs (I hope that I'm
describing this correctly) to generate
interrupts. I don't know how to connect these interrupts to my records
and the only documentation that
I can find is in devLibVME.h. Is there any more recent documentation?
Thank you,
Pierrick
--
Pierrick Hanlet
Fermi National Accelerator
Accelerator Front End Controls
+1-630-840-5555 -- lab
+1-312-687-4980 -- mobile
"Whether you think you can or think you can't, you're right" -- Henry Ford
- Navigate by Date:
- Prev:
Re: Issues building statically linked IOC Michael Davidsaver via Tech-talk
- Next:
Re: Attocube AMC100 Lang, Keenan C. via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
<2022>
2023
2024
- Navigate by Thread:
- Prev:
Re: Issues building statically linked IOC Érico Nogueira Rolim via Tech-talk
- Next:
Streamdevice discards part of message Brown, Garth via Tech-talk
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
<2022>
2023
2024
|