Experimental Physics and
Industrial Control System

On 4/18/23 13:28, Andrew Johnson via Tech-talk wrote:

The first thing I would try would be to change the seq/configure/RULES_BUILD ...

Recent versions move these rules to configure/RULES_SNCSEQ,
which is then installed as cfg/RULES_SNCSEQ where it is automatically
included by every package which includes this module in configure/RELEASE.

Replies:

Re: Sequencer configuration file Andrew Johnson via Tech-talk

References:

Sequencer configuration file David A. Slimmer via Tech-talk

Re: Sequencer configuration file Andrew Johnson via Tech-talk

Navigate by Date:

Prev: Motion Controls Engineer position at ALS in LBNL Miroslaw Dach via Tech-talk

Next: RE: Is the Sequencer and SNL still widely used? [SEC=OFFICIAL] STARRITT, Andrew via Tech-talk

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  <2023>  2024 

Navigate by Thread:

Prev: Re: Sequencer configuration file Andrew Johnson via Tech-talk

Next: Re: Sequencer configuration file Andrew Johnson via Tech-talk

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  <2023>  2024