Re: Phoebus configuration and PV connection

[Najm Us Saqib via Tech-talk <tech-talk@aps.anl.gov>]

Hi Xiaomin,

Your question sparked a memory from a few years ago. I am not an expert but your query looks similar. Give a try to the solution suggested by Kunal in the screenshot below, it worked for me.

Best,

Najm

On Wed, Aug 23, 2023 at 8:27 PM 刘晓敏 via Tech-talk <tech-talk@aps.anl.gov> wrote:

Hi,

I had a problem with phobus, when phoebus and alarm-server are on the same server, it runs without problems. But when I put phoebus-product on the client side and alarm-server on the server side, run ./phoebus.sh on the client side, and run ./alarm-server.sh on the server side, the phoebus connection fails, showing ‘No Alarm Server Connection’.

Kafka running on the service end is no problem. The configuration file settings .ini is as follows:

org.phoebus.pv.ca/addr_list=10.101.1.1

org.phoebus.applications.alarm/server=10.101.8.1:9092

org.phoebus.applications.alarm/config_alarm=Accelerator

org.phoebus.applications.alarm/config_alarm=Accelerator,Demo

I don't think there's anything wrong with that.

What is the reason for this error?

   

Thanks,

xiaomin

Attachment: AlarmServer.PNG
Description: PNG image